SATO FX3-LX - [Sbpl]

[SBPL]
264
STCL
Set when you use the STCL printer language.
SEPL
Set when you use the SEPL printer language.
(When [AUTO] is selected in the [Protocol] menu)
• When [AUTO] is selected, a message prompting you to restart the printer will appear
on the Home screen. In such a case, reboot the printer to apply the settings.
• Once the printer language is set, the name of the printer language will appear on the
Online screen after the printer language is finalized.
The printer language does not
appear until the printer language is
finalized.
When the print data has been sent in
SBPL.
The printer language appears on the
screen.
• Printer language is finalized with the received print data.
• When [SBPL] > [Standard Code] in the [Applications] menu is disabled, the [Protocol]
setting will be changed to [SBPL].
[SBPL]
SBPL (Sato Barcode Printer Language) is the common command that controls SATO barcode label
printers.