SATO FX3-LX - Loading the Media Roll (Printing in Linerless Tearoff Mode)

Loading the Media Roll (Printing in Linerless Tearoff Mode)
204
7. Tap [FEED].
The media is fed to the print start position.
Loading the Media Roll (Printing in Linerless Tearoff Mode)
• The print head and its surroundings are hot after printing. Be careful not to touch it, to
avoid being burned. Do not replace the media immediately after printing.
• Touching the edge of the print head with your bare hand could cause injury.
• When printing in linerless tearoff mode, install the optional linerless kit.