SATO FX3-LX - Interface Menu

[Network]
238
[Interface] Menu
The following settings are available in the [Interface] menu:
[Network]
This menu is to use LAN for the interface between the host and the printer.
The setting items are as follows:
[Settings] (USB+LAN Model Only)
Set the LAN settings.
The setting items are as follows:
[LAN] (USB+LAN Model Only)
Set the IPv4, IPv6, TCP/IP port number or proxy for the LAN.
The setting items are as follows:
[IPv4 (LAN)] (USB+LAN Model Only)
Set IPv4 for the LAN.