SATO FX3-LX - [Interface] Menu

[Interface] Menu
398
[Interface] Menu
The initial value refers to the setting value of the printer when it was shipped from the factory. The
table below shows the initial value of each setting item.
Setting Item Initial Value
[Network]
[Settings]
[LAN]
[IPv4 (LAN)]
[Mode] DHCP
[DHCP] -
[IP Address] 0.0.0.0
[Netmask] 255.255.255.0
[Gateway] 0.0.0.0
[DNS] 0.0.0.0
[IPv6 (LAN)]
[Mode] Disable
[DHCP] -
[IP Address] ::
[Prefix Length] 64
[Gateway] ::
[DNS] ::
[Ports]
[Port1] 1024
[Port2] 1025
[Port3] 9100
[Flow Control] STATUS4 ENQ
[TCP Connection Queue] Enabled
[Legacy Status for Port 9100] Disabled