Printer Memory and USB Memory
72
Memory of the Printer
Printer Memory and USB Memory
The memory of the user area of the printer is a maximum of 1GB.
USB memory can be connected to the printer. There is no capacity limit for USB memory.
There are two USB connectors (Type A) at the back of the printer and one inside the printer. USB
memory can be connected to any of these connectors.
What you can do with this printer while it is connected to USB memory is as follows:
• Get the HEX dump data
• Install certificates used for Wi-Fi authentication and for HTTPS
• Create clone data (copy the printer settings information)
• Register user data such as fonts, external characters, or graphics.
• Be sure to perform a virus check on the USB memory before connecting it to the
printer. SATO Corporation shall not be held responsible for any printer malfunctions
caused by a virus spread via USB memory.
• The printer does not support USB memory with security functions such as fingerprint
authentications.
• The printer does not support connection through the USB HUB.
To Next Page
Loading...
