Powering Off the Printer
112
Powering Off the Printer
• Do not connect or disconnect the power cord while your hands are wet. Doing so could
cause an electric shock.
• Do not power off the printer during operation, such as when printing or updating. Doing
so could cause a malfunction of the printer.
• Do not operate the printer or disconnect the power cord until the powering off process
is completed on the printer.
• An incorrect power on/off operation may damage the printer settings. In such a case,
the printer settings are reset to their initial values. It is always recommended to use
the power button to allow proper shutdown of the printer and ensure changes made to
menu settings are saved appropriately.
• You can power on/off the printer from the main power source by enabling [Start on AC]
in the [System] menu.
1. Make sure that the printer is in Offline mode before you power off.
If "Online" appears on the screen, tap [PAUSE] to change to Offline mode.
To Next Page
Loading...
