SATO FX3-LX - Configuring the Interface Settings; Interface Setting Methods; Configuring the Interface Settings from the Settings Mode of the Printer

Configuring the Interface Settings from the Settings Mode of the Printer
146
Configuring the Interface Settings
Interface Setting Methods
Configure the interface settings of the printer according to the communication conditions of the
connected network and computer.
You can set the interface settings of the printer doing either of the following.
• Set from the Settings mode of the printer
• Set using the All-In-One Tool from the computer
Configuring the Interface Settings from the Settings Mode of the Printer
Configure the settings related to the interfaces from the [Interface] menu, [Bluetooth] menu, or [Wi-Fi]
menu of the Settings mode of the printer.
1.
Tap on the Home screen or Offline screen to show the [Settings] menu.
2. Input the password if it is enabled.
3. Tap [Interface], [Bluetooth], or [Wi-Fi].
To configure settings related to LAN/USB/NFC connections or CR/LF, CAN/DLE codes, tap
[Interface].
To configure settings related to Bluetooth, tap [Bluetooth].