[Energy Saving]
286
[Sound]
Set the volume and the key sounds.
The setting items are as follows:
[Volume]
Set the volume for the printer sounds, such as the error buzzer and key sound.
The setting range is from 0 to 8.
0 is the lowest and 8 is the highest.
If you set the volume to 0, it mutes the sound.
• You can set this item from the swipe down menu as well.
[Key Sound]
Set the type of sounds when a key is tapped.
The options are as follows:
None
Mute key sounds.
Key Sound1
Key Sound2
Key Sound3
[Energy Saving]
The setting items are as follows:
[AC (Without Battery)]
Set the Energy Saving function when using the AC power supply.
The setting items are as follows:
[Sleep Timeout]
Set the period before the printer enters sleep mode.
The setting range is from 0 to 60 minutes.
• The sleep function is disabled if you set it to 0.
Conditions Not to Transit to Sleep Mode
• While the Home screen is shown or during Settings mode
• When the temperature in the printer exceeds the tolerance range (Error 1022)
• When the printer is connected by wireless LAN ad-hoc mode or Wi-Fi Direct
To Next Page
Loading...
