305
The procedure to install the certificates and PAC files is as follows:
1. Save the certificate files to the USB thumb drive memory’s root folder.
Acceptable file extensions are as follows:
◦ .pem, .crt, .cer, .der for Root CA and client certificate in PEM or DER format
◦ .pfx and .p12 for client certificates in PKCS #12 format
◦ .prv and .key for private keys in PEM/PKCS#8 format
◦ .pac for PAC files
2. Insert the USB memory into the USB connector (Type A).
3. Go to the [Settings] > [Tools] > [Install Certificates] menu.
4. Tap the certificate you want to install. Refer to the item description above.
5. Tap the certificate file from the list.
[Delete Certificates]
Delete certificates used for Wi-Fi authentication and for HTTPS.
HTTPS
Deletes the installed HTTPS certificates.
Wi-Fi Root CA
Deletes the installed Wi-Fi Root CA certificates.
Wi-Fi Client
Deletes the installed Wi-Fi client certificates.
Wi-Fi Private Key
Deletes the installed Wi-Fi private key.
EAP-FAST PAC File
Deletes the installed EAP-FAST PAC file.
The procedure to delete the certificates and PAC files is as follows:
1. Go to the [Settings] > [Tools] > [Delete Certificates] menu.
2. Tap the certificate you want to delete. Refer to the item description above.
3.
Tap on the message.
[Clone]
Copy the current printer settings and installed data to the USB memory.
Available only if you have connected the USB memory.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
