SATO FX3-LX - Page 388

Notes on the Stop/Cut Position of Different Media
388
When the media is cut on the area not to be cut, it could cause a paper jam or damage.
• Media Roll
The area not to be cut is on the perforated line and on the area within 1 mm (0.04") near side
from the perforated line.
(1) Area not to be cut
(2) Perforated line
• Fan-fold Media
The area not to be cut is on the perforated line and on the area within 4 to 25 mm (0.16" to 0.98")
near side from the perforated line.
(1) Area not to be cut
(2) Perforated line