179
• The settings of the printer driver should be done by an administrator.
(1) [Stocks]
Manages stored media. The stored media can be used from applications.
(2) [Fonts]
Defines and manages barcode fonts and command fonts. You can add, modify, and delete
definitions. Also, you can print by replacing the system fonts with the printer’s device fonts when
defining replacement fonts.
(3) [Driver Settings]
Sets whether to enable the driver settings or application settings.
(4) [Configure Printer]
Obtains and changes the settings of the connected printer.
(5) [Maintenance]
Outputs the current driver settings to a file and reads the settings.
(6) [International]
Sets the display language of the tab for printer driver settings and the tab for displaying the
version.
• Be sure to manage the master data for fonts by customer. SATO do not take
responsibility for font data stored on the printer.
To Next Page
Loading...
