SATO FX3-LX - Page 227

227
Vertical
Set the print position in the vertical direction.
Set the correction value from the standard printing position as "-" for the direction of the paper
feed and "+" for the direction opposite to the paper feed.
(1) Feed direction
The setting range is from -792 to +792 dots.
Horizontal
Set the print position in the horizontal direction.
Set the correction value from the standard printing position when facing the printer as "-" to adjust
to the right side and "+" to adjust to the left side.
(1) Feed direction
The setting range is from -792 to +792 dots.