EasyManuals Logo

SATO FX3-LX User Manual

SATO FX3-LX
566 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #257 background imageLoading...
Page #257 background image
257
[Counter] (SOS users only)
You can select the counter for the print head, cutter, or both for the timing to perform the periodic
notification.
Appears only if you have selected [Counter] in the [Type] menu.
Advanced setting items appear on the [Periodic Notification] menu according to the selected options.
The options are as follows:
[Thermal Head]
[Cutter]
[Thermal Head+Cutter]
[Head] (SOS users only)
You can specify or check the print distance of the print head for the timing to perform the periodic
notification.
Appears only if you have selected [Thermal Head] or [Thermal Head+Cutter] for [Counter] in the [Type]
menu.
The setting items are as follows:
[Meters] (SOS users only)
Specifies the print distance of the print head for the timing to perform the periodic notification. You will
be notified for every meter you specify.
The setting range is from 1 to 100,000.
[Last Update] (SOS users only)
Shows the print distance of the print head for the last periodic notification.
[Next Update] (SOS users only)
Shows the print distance of the print head for the next periodic notification.
[Current Value] (SOS users only)
Shows the current print distance of the print head.
[Cutter] (SOS users only)
You can specify or check the number of cut times of the cutter for the timing to perform the periodic
notification.
Appears only if you have selected [Cutter] or [Thermal Head+Cutter] for [Counter] in the [Type] menu.
The setting items are as follows:
[Cuts] (SOS users only)
Specifies the number of cut times of the cutter for the timing to perform the periodic notification. You
will be notified for each number of cut times you specify.
The setting range is from 1 to 1,000,000.
[Last Update] (SOS users only)
Shows the number of cut times of the cutter for the last periodic notification.

Table of Contents

Other manuals for SATO FX3-LX

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SATO FX3-LX and is the answer not in the manual?

SATO FX3-LX Specifications

General IconGeneral
CutterYes
CertificationEN55032, EN55024, EN61000-3-2 / 3-3, EN300 330-2 / -1, EN301 489-1 / -3 / -17, FCC Part15 Subpart B, ICES 003 UL60950-1, CSA C22.2 No.60950-1, IEC/EN60950-1 FCC Part15 Subpart C/E, ISED RSS-Gen, ISED RSS-247, EN 300 328, EN 301 893
Built-in barcodesAZTECCODE, CODABAR (NW-7), Code 128 (A/B/C), Code 39, Code 93, Data Matrix, EAN13, EAN8, GS1 COMPOSITE, GS1 DataBar, GS1-128, Industrial 2/5, Interleaved 2/5, Matrix 2/5, MaxiCode, Micro QR Code, MicroPDF417, PDF417, POSTNET, QR Code, UPC-A, UPC-E
Built-in RFID moduleNo
Maximum resolution- DPI
Maximum print height500 mm
Maximum printing width80 mm
Battery voltage14.4 V
AC input voltage100 - 240 V
Battery capacity1950 mAh
AC input frequency50 / 60 Hz
Suitable for use in country/locationEurope
Sustainability certificatesENERGY STAR
DisplayLCD
Control typeTouch
Product colorWhite
Display diagonal7 \
Display resolution480 x 800 pixels
International Protection (IP) codeIPX2
Wi-Fi standards802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version4.1
USB 2.0 ports quantity4
Connectivity technologyWired & Wireless
Media thickness0.14 - 0.19 mm
Maximum roll diameter105 mm
Storage temperature (T-T)-5 - 60 °C
Operating temperature (T-T)5 - 35 °C
Storage relative humidity (H-H)30 - 90 %
Operating relative humidity (H-H)30 - 75 %
Cables includedAC
Quantity per pack1 pc(s)
Languages supportMulti
Weight and Dimensions IconWeight and Dimensions
Depth225 mm
Width132 mm
Height180 mm
Weight3000 g

Related product manuals