SATO FX3-LX - Page 269

269
• The length of 1 dot is 0.083 mm (0.0033").
• You can change the unit to dots or inches in the [System] > [Regional] > [Unit] menu.
[Top]
Set the top offset position of the label.
The setting range is from -120 to +120 dots.
• The length of 1 dot is 0.083 mm (0.0033").
• You can change the unit to dots or inches in the [System] > [Regional] > [Unit] menu.
[Caret]
Set the caret (^) code.
The setting range is from 0 to 255.
• Each code (Caret, Delimiter and Tilde) must be set to different values.
[Delimiter]
Set the delimiter (,) code.
The setting range is from 0 to 255.
• Each code (Caret, Delimiter and Tilde) must be set to different values.
[Tilde]
Set the tilde (~) code.
The setting range is from 0 to 255.
• Each code (Caret, Delimiter and Tilde) must be set to different values.
[Clock Format]
Set the date format.
The options are as follows:
• [(none)]
• [MM/DD/YY (24-hour clock)]
• [MM/DD/YY (12-hour clock)]
• [DD/MM/YY (24-hour clock)]
• [DD/MM/YY (12-hour clock)]