[STCL]
272
[3rd Byte Code]
Set the third byte code.
You can change the code only if you have selected [Custom] in the [Control Code] menu.
The setting range is from 0 to 255.
• Each code must be set to different values.
[Font Settings]
Set the font.
The setting items are as follows:
[Zero Slash]
Set whether to print the number zero (0) with or without a slash (/).
Print zero with a slash.
Print zero without a slash.
[€]
Set the European currency symbol to the ASCII code.
The setting range is from 0 to ff (hexadecimal).
[Code Page]
Select the code page to be used from the list.
[Half-width Symbol]
Set whether to print symbols with half-width characters.
[Rotation]
Set the page orientation for label printing.
The options are as follows:
0 degree
Labels are printed in portrait orientation.
90 degree
Labels are printed in landscape orientation.
[Ignore Paper Size Command]
Set whether to ignore a paper size command in the print data.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
