[HEX-Dump]
298
• If you enable [Hex Dump Mode], the design of the Online/Offline screen changes.
• You can save a maximum of 10 received data files for each type of interface.
Depending on the file size, the number of files you can save will be less than 10.
• The details of the files created inside "hexdump/" of the printer are as follows:
BT00xx.bin
Received data through Bluetooth.
LAN00xx.bin (USB+LAN model only)
Received data through LAN.
NFC00xx.bin
Received data through NFC.
PIPE00xx.bin
Received data through pipe.
USB00xx.bin
Received data through USB.
WIFI00xx.bin
Received data through wireless LAN.
[Buffer Dump]
Save the receive buffer data to the printer.
Available only if you disabled the [Hex Dump Mode] menu.
Tap [START] on the startup screen to save the data to the printer.
Save the receive buffer data to "buff/" in the printer.
To Next Page
Loading...
