[Wi-Fi Setting]
324
[Port3]
Set the port number of Port3.
For the one-port connection of Status3/Status4/Status5, this port is used for both receiving print data
and returning the printer status.
The setting range is from 1 to 65535.
• Each port (1, 2 and 3) must be set to different values.
• You can change the return status format of Port3 to legacy status by enabling [Legacy
Status for Port 9100].
[Flow Control]
Set the communication protocol.
The options are as follows:
• [STATUS4]
• [STATUS4 ENQ]
• [STATUS3]
• [STATUS5]
• [NONE]
[TCP Connection Queue]
Set whether to allow queuing for connection when multiple hosts or applications are sending
connection requests to the printer.
While connecting with one host or application, the printer can receive connection requests from
other hosts or applications. The subsequent connection requests are put on hold, and processed
in order of reception after the first connection is closed.
While connecting with one host or application, the printer cannot receive connection requests from
other hosts or applications.
• When you have enabled the setting, be sure to use one port connection for Status3,
Status4, and Status5. Operation using two port connections for Status4 is not
guaranteed.
[Legacy Status for Port 9100]
Set whether to change the return status format of Port3 to legacy status.
Does not appear if you have selected [NONE] in the [Flow Control] menu.
In legacy status, the return status format of Port3 becomes as follows:
To Next Page
Loading...
Need help?
General
Weight and Dimensions
