Siemens HydroRanger 200 HMI - Page 366

Programming chart
G.1 Programming chart
HydroRanger 200 HMI
364 Operating Instructions, 06/2018, A5E36281317-AC
Parameter
Altered values for indices/point numbers
1
2
3
Record Readings
Pump Records (3.2.9.) (Page 260)
Reading Minimum (3.2.8.9.)
(Page 258)
Pump Records
Pump Run Time (3.2.9.3.)
(Page 260)
Pump Hours (3.2.9.2.) (Page 260)
Pump Starts (3.2.9.4.) (Page 260)
Pump Run-ONs (3.2.9.5.)
(Page 260)
Flow Records
Pump Records (3.2.9.) (Page 260)
Flow Minimum (3.2.8.16.)
(Page 259)
Installation Records
Manufacture Date (3.1.9.)
(Page 253)
Power-ON Time (3.2.5.) (Page 255)
Power-ON Resets (3.2.4.)
(Page 255)
Open Channel Monitoring
Primary Measuring Device (2.13.2.)
(Page 246)
Flow Exponent (2.13.4.1.)
(Page 241)
PMD Dimensions (2.13.5)
(Page 246)
Maximum Head (2.13.4.2.)
(Page 243)
Maximum Flow (2.13.4.3.)
(Page 243)
Zero Head (2.13.4.5.) (Page 244)
Flow Time Units (2.13.4.4.)
(Page 244)
Flowrate Decimal (2.13.4.6.)
(Page 245)
Flowrate Units (2.13.4.7.) (Page 245)
Head 1 (2.13.6.1.1.) (Page 247)
Flow 1 (2.13.6.1.2.) (Page 248)
Low Flow Cutoff (2.13.4.8.)
(Page 246)
Auto Zero Head (2.13.3.) (Page 240)