Siemens optiPoint 410 entry User Manual

Phone Menu
150
||||---10=SIP User Id? ! Number Editor
||||---11=SIP Password? ! Password Editor
||||---12=SIP Session Timer? Off
! Switch Editor
||||---13=SIP Session Time? 3600 ! Number Editor
||||---14=Emergency No.? ! Number Editor
||||---15=Voice mail No.?
! Number Editor
||||---16=MWI Server Addr.? 0.0.0.0! IP Number Editor
||||---17=Registration Timer? 3600 ! Number Editor
| | | |--- 26=System Name?
! Text E dit o r
||||---27=Conf Server Addr.? 0.0.0.0! IP Number Editor
||||---28=Keyset?
|||||---01=Line Select a line
||||||---1=Rank
||||||---2=Ringer setting
||||||---3=Hot Line
! Number Editor
||||||---0=End
|||||---02=Registration LEDs? On ! Switch Editor
|||||---03=Rollover type?
||||||---1=No ring?
||||||---2=Alert ring? !
||||||---3=Standard ring?
||||||---4=Alert beep?
||||||---0=End?
|||||---04=Rollover Vol? 2
! Gradient Editor
|||||---05=Orig line pref?
||||||---1=Idle? !
||||||---2=Primary?
||||||---3=Last?
||||||---4=None?
||||||---0=End?
|||||---06=Term line pref?
||||||---1=Ringing? !
||||||---2=Ringing PLP?
||||||---3=Incoming?
||||||---4=Incoming PLP?
||||||---5=None?
||||||---0=End?
|||||---07=Line action mode?
||||||---1=Hold ? !
||||||---2=Release?
||||||---0=End?
|||||---09=Show focus? on
|||||---10=Forwarding Ind? off
|||||---11=Reservation Timer? 60
|||||---00=End?
||||---29=Dial Plan? Off
! Switch Editor
||||---30=Group Pickup URI?
Not a memb.
||||---31=SIP Server type?
|||||---1=HiQ/HiPath 8000?
|||||---2=BroadSoft?
|||||---3=Sylantro?
|||||---4=Auto?
|||||---0=End?
| | | |--- 32=Allow Refuse? On
||||---33=Hot/Warm Phone? Off
|||||---1=Normal line Action?
|||||---2=Warm line?
|||||---3=Hot line?
|||||---0=End?
||||---34=Wap? Not economy/economy plus
|||||---1=Wap Mode?
|||||---2=Wap Server Address?
|||||---3=Wap Server Port?
|||||---0=End
Menu Default Editor

Siemens optiPoint 410 entry Specifications

General

Brand	Siemens
Model	optiPoint 410 entry
Category	Telephone
Language	English