Siemens optiPoint 410 entry - Configure LAN Ports

Extended Administration
59
VLAN Settings
Configure LAN Ports
Layer 2
Signalling
(only if L2On)
! page 193
- 01=Network
- 06=QoS
- 6=L2 Signalling
(enter Vaulue)
- Quality of Service
- Layer 2 Signalling
(enter Layer 2 Signalling value)
Layer 2 Default
(only if L2On)
! page 193
- 01=Network
- 06=QoS
- 7=L2 Default
- Quality of Service
- Default
(enter Default value)
Changing any QoS settings will take effect as soon as the
optiPoint 410/420 is restarted.
Parameter
Phone path
(Menu ! page 148)
Web Interface path
(Menu ! page 110)
Manual VLAN
Identifier
! page 203
- 01=Network
- 06=QoS
- 8=VLan ID
(enter VLAN ID)
- Quality of Service
- Manual vLAN identifier
(enter VLAN ID)
VLAN Discovery
Method
! page 226
- 01=Network
- 06=QoS
- 9=VLAN discovery
(select VLAN discovery)
- Quality of Service
- vLAN discovery method
(select VLAN discovery)
Changing the VLAN Discovery Method will take effect as soon as
the optiPoint 410/420 is restarted.
Parameter
Phone path
(Menu ! page 148)
Web Interface path
(Menu ! page 110)
LAN/PC Port
Setting
! page 194
- 01=Network
- 10=LAN port settings or
- 11=PC port settings
(select port setting)
- LAN port settings
- LAN port 1 (LAN) or
- LAN port 2 (PC)
(select port setting)
Changing any LAN port setting will cause the optiPoint 410/420 to
restart.
Parameter
Phone path
(Menu ! page 148)
Web Interface path
(Menu ! page 110)