Siemens optiPoint 410 entry User Manual

Alphabetical Reference
188
FTP username
• Enter the name defined in the ! FTP server as user for accessing the
server.
• The password must correspond to the ! FTP password and match the
username on the server.
• Value range table:
• Editing by phone: Text Editor ! page 155.
! page 74 ! page 118
Function key
• A key on the optiPoint 410/420 family S V6.0 that may be logically as-
sociated with a supported function. A function key can support a sec-
ond function:
– Normal function
– Shifted function
• For optiPoint 420 advance and optiPoint self labeling key module there
is an additional field available to enter a name or number for this key.
• If required, enter additional parameters in the dialog.
• For detailed information see operating manual.
! page 73 ! page 124
G.711 Silence Suppression
• It suppresses transmission of packets on no conversation.
• Effects the following codecs: G.711, G.723 und G.729.
• Editing by phone: Switch Editor ! page 157.
! page 92 ! page 121
Group pickup URI
• To be a member of a Call Pickup group for a notification service or the
user initiated service the phone must be configured by administration
with the URI of the call Pickup group service which is provided by the
server. Enter the URI of the Call Pickup group <groupcallpickup@<SIP
Server IP> (e. g. groupcallpickup@172.16.127.95 or Domain Name) .
! page 63 ! page 116
Permitted values alphanumeric
Length max. 92 digits

Siemens optiPoint 410 entry Specifications

General

Brand	Siemens
Model	optiPoint 410 entry
Category	Telephone
Language	English