Siemens optiPoint 410 entry User Manual

Alphabetical Reference
221
Terminal Hostname
• This field ist provided with the E164 number but you can change it. En-
ter a new host name for the telephone. The host name is transmitted
to the DHCP server together with the MAC address while the tele-
phone registers at the DHCP server. The DHCP server sends an IP ad-
dress to the telephone; at the same time, it transmits this IP address
together with the host name to the DNS server, where this association
is registered. Within the DNS server's range, the telephone can now
be addressed using its host name.
• If Mobility is unsing, the hostname is overwriten by the current E164
number of the Mobility user. The new hostname can be used to open
the WBM of the phone in the browser.
• DHCP has to be activated to enable this feature.
! page 57 ! page 114
Terminal IP address
• Enter the ! IP address for the optiPoint 410/420 family S V6.0 if not
provided by ! DHCP dynamically (! DHCP IP assignment).
• If the value was assigned dynamically, it can only be read.
• The change will only have effect if you restart the phone.
• Value range table:
• Editing by phone: IP Number Editor ! page 159.
! page 57 ! page 114
Terminal mask
• Enter the ! Subnet Mask for the optiPoint 410/420 family S V6.0 if not
provided by ! DHCP dynamically (! DHCP IP assignment).
• If the value was assigned dynamically, it can only be read.
• The change will only have effect if you restart the phone.
• Value range table:
• Editing by phone: IP Number Editor ! page 159.
! page 57 ! page 114
Permitted values numeric
Length max. 15 digits (incl. dots)
Permitted values numeric
Length max. 15 digits (incl. dots)

Siemens optiPoint 410 entry Specifications

General

Brand	Siemens
Model	optiPoint 410 entry
Category	Telephone
Language	English