Alphabetical Reference
168
Bandwith calculation for WAN (e.g. ATM)
! page 92 ! page 121
Branding/Identity name
• Enter the name (e.g. a company name), which is to be displayed in the
third line of the display in idle mode of the optiPoint 410/
420 family S V6.0.
• Range: Alphanumeric – 10 digits.
• Editing by phone: Text Editor ! page 155.
! page 65 ! page 115
Call Recorder (HiPath 8000)
Enter the dial string for example for ASC Call Recording (EVOip). Activate-
or deactivate the "Audible indication".
You can search for calls and replay them e.g. using the standard ASC appli-
cations POWERplay, WEBplay, or INSTANT WEBplay.
Call Recording has to be enabled in the access list (see ! page 72) and in
the configuration menu of the phone (see user manual).
! page 63 ! page 116
Callback URIs
For "Callback – Busy line", and "Delete callbacks" enter the access code of
the HiPath 8000. "Callback – No reply" is for future use – not supported
with HiPath 8000.
Voice Codec Packet size
[ms]
Payload
Bytes
WAN
Packet size
[Bytes]
Used WAN-
Bandwidth
[kBit/s]
G.711
1
1 In the SIP environment it is possible to activate silence supression. In this case the band-
width calculation values are max values
10 80 125 100,0
G.711
2
20 160 205 82,0
G723
2
2 For G.723 it is not possible to activate silence suppression and the only available sample
size is 30 ms
30 24 69 18,4
G.729
3
3 In the SIP environment silence suppression is always active currently. In this case the band-
width calculation values are max values.
10 10 55 44,0
G.729
3
20 20 65 26,0
G.722
4
4 For G.722 it is not possible to activate silence suppression.
10 80 125 100,0
G.7224 20 160 205 82,0
To Next Page
Loading...
Need help?
General