Siemens optiPoint 410 entry User Manual

Extended Administration
57
Extended Administration
Configure Network Parameters
To access a SIP server as an IP client some network related information
have to be configured.
Network Addresses
Depending on the SIP network environment different changes are
necessary ! page 48.
Parameter
Phone path
(Menu ! page 148)
Web Interface path
(Menu ! page 110)
DHCP
IP Assignment
! page 175
- 01=Network
- 01=DHCP IP assign
(switch on/off)
- Network IP and routing
- DHCP
(activate/deactivate checkbox)
Te rm i na l
IP Address
! page 221
- 01=Network
- 02=Terminal IP addr.
(change IP address)
- Network IP and routing
- Terminal IP address
(enter IP address)
Te r m i n a l M a s k
! page 221
- 01=Network
- 03=Terminal mask
(change terminal mask)
- Network IP and routing
- Terminal mask
(enter terminal mask)
Default Route
(Gateway)
! page 174
- 01=Network
- 04=Default route
(change default route)
- Network IP and routing
- Default gateway
(enter gateway address)
IP Route 1/2
(IP address/
Gateway/Mask)
! page 191
- 01=Network
- 05=IP routing
- 1=Route 1 or
- 2=Route 2
- 1=IP address 1/2
(change IP address)
- 2=Gateway 1/2
(change IP address)
- 3=Mask 1/2
(change subnet mask)
- Network IP and routing
- IP routing (Route 1/2)
- Route
(enter IP address)
- Gateway
(enter IP address)
- Mask
(enter subnet mask)
DNS Domain
Name
! page 182
- 01=Network
- 07=DNS Domain name
(change domain name)
- Network IP and routing
- Domain name
(enter domain name)

Siemens optiPoint 410 entry Specifications

General

Brand	Siemens
Model	optiPoint 410 entry
Category	Telephone
Language	English