Siemens optiPoint 410 entry - Port Control and Primary DNS IP Address

Alphabetical Reference
207
Port Control
This parameters are needed for development only. The following options are
availabel:
• Service Agent
–
• TestInterface
• Resource Sharing
•SNMP Port
• Web Server
– Enables/disables the Web interface for this phone
! page 98 ! page 145
Primary DNS IP address
• Enter the ! IP address of the ! DNS server if not provided by
! DHCP dynamically (! DHCP IP assignment).
• Value range table:
• Editing by phone: IP Number Editor ! page 159.
! page 57 ! page 114
QDC Address
Enter IP address of the Quality Data Collection Server. For more informa-
tion refer to HiPath QoS Data Collection V1.0 Interface Description.
! page 142
QDC Port
Enter port address of the Quality Data Collection Server. For more informa-
tion refer to HiPath QoS Data Collection V1.0 Interface Description.
! page 142
Permitted values numeric
Length max. 15 digits (incl. dots)