Siemens optiPoint 410 entry - Quality of Service (Qos)

Extended Administration
58
Quality of Service (QoS)
By changing the Quality of Service parameter you can affect the speech
quality results. Further speech quality parameters see ! page 92.
QoS Configuration
Primary DNS IP
Address
! page 207
- 01=Network
- 08=Prim DNS IP addr
(change IP address)
- Network IP and routing
- Primary DNS IP address
(enter IP address)
Secondary DNS
IP Address
! page 213
- 01=Network
- 09=Sec DNS IP addr
(change IP address)
- Network IP and routing
- Secondary DNS IP address
(enter IP address)
Te rm i na l
hostname
! page 221
(not applicable)
- Network IP and routing
- Terminal hostname
(automaticly filled in)
Changing either the DHCP IP assignment or the Terminal IP address
will take effect as soon as the optiPoint 410/420 is restarted.
Parameter
Phone path
(Menu ! page 148)
Web Interface path
(Menu ! page 110)
QoS Mode
! page 208
- 01=Network
- 06=QoS
- 2=QoS L2/L3
- 1=L2Off/L3Off or
- 2=L2Off/L3On or
- 3=L2On/L3On
- Quality of Service
- Required
(select QoS mode)
Layer 3 Voice
(only if L3On)
! page 193
- 01=Network
- 06=QoS
- 3=L3 Voice
(select value)
- Quality of Service
- Layer 3 Voice
(select Layer 3 Voice value)
Layer 3
Signalling
(only if L3On)
! page 193
- 01=Network
- 06=QoS
- 4=L3 Signalling
(select value)
- Quality of Service
- Layer 3 Signalling
(select Layer 3 Signalling value)
Layer 2 Voice
(only if L2On)
! page 194
- 01=Network
- 06=QoS
- 5=L2 Voice
(enter Value)
- Quality of Service
- Layer 2 Voice
(enter Layer 2 Voice value)
Parameter
Phone path
(Menu ! page 148)
Web Interface path
(Menu ! page 110)