Siemens optiPoint 410 entry User Manual

Extended Administration
63
SIP Features
Parameter Phone path
(Menu ! page 148)
Web Interface path
(Menu ! page 110)
Call handling options
Auto answer
! page 214
Y
- 2=Configuration
- 32=Auto answer
(mark to be enabled)
- SIP features
- Auto answer
(mark to be enabled)
Beep on Auto an-
swer
! page 215
Y
- 2=Configuration
- 33=Autoanswer beep
(mark to be enabled)
- SIP features
- Beep on Auto answerI
(mark to be enabled)
Auto reconnect
! page 215
Y
- 2=Configuration
- 34=Auto reconnect
(mark to be enabled)
- SIP features
- Auto reconnect
(mark to be enabled)
Beep on Auto
reconnect
! page 215
Y
- 2=Configuration
- 35=Autoreconnect beep
(mark to be enabled)
- SIP features
- Beep on Auto reconnect
(mark to be enabled)
Allow Refuse
! page 164
- 02=System
- 32=Allow Refuse
(enable or disable)
- SIP features
- Refuse call feature enabled
(mark to be enabled)
Group pickup
Group pickup
URI
! page 188
- 02=System
- 30=Group pickup URI
(enter Group picup URI)
- SIP features
- Group pickup URI
(enter URI)
HotWarm Phone
Phone type
! page 190
Default dial
string
! page 189
- 02=System
- 33=Hot/Warm Phone
- 1=Normal line Action
- 2=Warm line
- 3=Hot line
(select type)
and default dial string
- SIP features
- Phone typeI
(select type)
- Default dial string
(enter dial string)
Centralized-controlled conference ( only with Sylantro Servers)
Conference
factory URI
! page 170
- 02=System
- 27=Conf Server Addr.
(enter URI)
- SIP features
- Conference factory URI
(enter address)

Siemens optiPoint 410 entry Specifications

General

Brand	Siemens
Model	optiPoint 410 entry
Category	Telephone
Language	English