Siemens optiPoint 410 entry User Manual

Extended Administration
99
Survivability
The survivability feature will allow the SIP User Agent to register with a
backup SIP Proxy which will be used to make and receive calls when the
primary SIP Proxy fails or is not reachable due to a network failure.
The prime reason for this feature is to maintain basic call functionality
when network failures occur and it is therefore expected that some fea-
tures and functionality will not be available when working in a survivability
mode.
Parameter
Phone path
(Menu ! page 148)
Web Interface path
(Menu ! page 110)
Backup Address
! page 219
-16=Survivability
- 1=Backup address
(change IP address
1
)
1 or host name (if DNS is applicable ! page 41)
- Survivability
- Backup IP address or DNS
name
(enter IP address
1
)
Backup Port
! page 219
-16=Survivability
- 2=Backup port
(change port address )
- Survivability
- Port
(enter port address)
Backup
Registration
! page 220
- 16=Survivability
- 3=Backup registration
(switch on/off)
- Survivability
- Backup Registration
(mark to enable)
Backup Reg
Timer
! page 220
- 16=Survivability
- 4=Backup reg timer
(enter time)
- SIP environment
- Backup Registration timer value
(enter time)
Backup OBP
! page 220
- 16=Survivability
- 5=Backup OBP
(switch on/off)
- Survivability
- Backup Outbound proxy
(mark to enable)
Backup
Tr a n s p o r t
! page 220
- 16=Survivability
- 6=Backup transport
(TCP or UDP; UDP is pre-
pared)
- Survivability
- Backup SIP transport
(TCP or UDP;UDP is prepared)

Siemens optiPoint 410 entry Specifications

General

Brand	Siemens
Model	optiPoint 410 entry
Category	Telephone
Language	English