Data formats and data records
SIMATIC - ET 200pro motor starter
D-26 GWA 4NEB 950 5661-02 DS 04
*)
Special feature of hours of operation
The motor starter records 2 hours of operation values:
• The hours of operation of the motor, They specify how long the switching ele-
ments and thus the motor were switched on.
• The hours of operation of the device (motor starter), specifying how long the
voltage supply DC 24 V-NS of the motor starter was switched on.
Both hours of operation values are recorded in data record 95 – statistical data.
They are entered alternately in a 5-second cycle in the data field 'Hours of oper-
ation'. The bit 'Hours of operation selection' specifies which of the two hours of
operation values has been transferred.
[0]: Hours of operation – motor
[1]: Hours of operation – device.
617 52...53 Reserved = 0
618 54...55 Reserved = 0
619 56...59 Number of stops with
mechanical braking
)
0…4294 967 295 1
620 60...63 Reserved = 0
621 64...67 Reserved = 0
622 68...71 Reserved = 0
623 72...75 Reserved = 0
624 76...79 Reserved = 0
625 80...83 Number of starts output
BO (brake output)
1)
0…4294 967 295 1 —
626 84...87 Maintenance timer
2)
0…4294 967295 s 1 —
1) only HF starters with brake control
2) only HF starters
ID no. Byte Meaning Value range /
[coding]
Increme
nt
Note
Table D-14: Data record 95 – statistical data (Continued)
To Next Page
Loading...
