ITC Operating mode
5.5 Assigning device parameters
ITC V3, ITC V3 PRO
106 Operating Instructions, 03/2024, A5E42761061-AF
• Size and position of the on-screen keyboard
• Desktop orientation
• Background image
Specifying the position of the taskbar
Touch one of the 6 buttons on the displayed touch screen. The configuration settings will be
saved and the taskbar will then be moved to the corresponding position. The taskbar cannot
be moved with drag&drop. The default position of the taskbar is "Bottom center".
Specifying the display of the taskbar
• "Always in front" (default setting)
The taskbar is displayed after the device is switched on. The buttons to minimize or
maximize the taskbar are not displayed. The operator cannot change the taskbar.
• "Always hidden"
The taskbar is hidden. The operator cannot display the taskbar and, thus, cannot make any
changes to the active client-server connections. Because the configuration settings cannot
be opened without the taskbar, this setting can only be disabled again with external
access, see section "Remote configuration (Page 110)".
• "Minimized"
The taskbar is minimized in the display. The operator can maximize or minimize the start
bar using the appropriate buttons, which are always shown.
Specify size of "Minimize start bar" button
If the "Minimize small button" option is enabled, the height of the "Minimize" button is
reduced by half.
Specifying menu entries in the Start menu
The settings show the menu entries of the Start menu in the taskbar.
• Web browser
• Screen brightness
• Clean screen
• USB devices
If you select a menu entry, it will be displayed. If you deselect a menu entry, it will be hidden
and can no longer be called.
Specifying the size and position of the on-screen keyboard
In "Position", you can dock the on-screen keyboard at the top or bottom edge of the screen. In
"Size", you select one of 5 predefined keyboard sizes.
To Next Page
Loading...
