Siemens SIMATIC ITC1200 V3 - Climatic Ambient Conditions; Transport and Storage Conditions

Technical specifications
8.4 Climatic ambient conditions
ITC V3, ITC V3 PRO
176 Operating Instructions, 03/2024, A5E42761061-AF
8.4 Climatic ambient conditions
8.4.1 Transport and storage conditions
The following information applies to a device that is transported in the original packaging
and weather-proof packaging, and stored from some time.
Type of condition
Permitted range
Temperature
–20 ... 60 °C
Atmospheric pressure
1140 ... 660 hPa, corresponds to an elevation of -1000 to 3500 m
Relative humidity
10 ... 90 %
Pollutant concentration
In accordance with ANSI/ISA-71.04-2013 severity level G3
Note
If dewing has developed, wait until the HMI device has dried completely before switching it
on.
Do not expose the HMI device to direct radiation from a heater.