Overview
1.3 Layout of the devices
ITC V3, ITC V3 PRO
Operating Instructions, 03/2024, A5E42761061-AF
19
1.3.2 ITC V3 PRO devices
1.3.2.1 Overview
The PRO devices are available in the following variants. The figures show examples.
• PRO devices for support arm (not extendable, flange top)
These devices are designed for mounting on a support arm without extensions such as
Extension Units. If required, the PRO Option handles can be used between the support
arm and the device.
• PRO devices for pedestal (extendable, flange bottom)
These devices are designed for mounting on a pedestal with extensions such as Extension
Units. If required, the PRO Option handles can be used between the pedestal and the
device.
• PRO devices for support arm (extendable, round tube)
These devices are designed for mounting on a support arm with extensions such as
Extension Units or PRO Options (e.g. handles, keyboard tray).
Additional information on the PRO Options as well as adapters and other system components
can be found in the section "System components for PRO devices (Page 25)".
To Next Page
Loading...
