ITC Operating mode
5.6 Configuring the server
ITC V3, ITC V3 PRO
112 Operating Instructions, 03/2024, A5E42761061-AF
5.6.1.2 Administration on the server
Administration Windows Server
The administration on the server depends on the individual IT infrastructure. Establish the
settings for the server configuration under the following menu commands under "Start >
Programs > Administrative Tools:"
• Terminal services configuration
• Terminal services administration
• Terminal services licensing
You will find more information on the Internet in the "MSDN Knowledge Base" of the
"Microsoft support (http://support.microsoft.com)".
You can specify on the server that certain users of the Industrial Thin Client can only access
specified programs on the server.
When the device is configured, you assign a password for the connection to the server. If the
device establishes a connection to the server, a password will be requested by default
irrespective of this. Under "Start > Programs > Administrative Tools > Terminal Service
Configuration" you can specify that the password is not requested again.
Administration Windows 7
In order for the Industrial Thin Client to access the server, you must enable remote access on
the server. You can enable remote access under "Start > Settings > Control Panel > System >
Remote" with the option "Allow users to establish a remote desktop connection." Use the
"Select remote users" button to open a dialog in which you select the users that are
authorized to access the server.
In addition, you enable the server ports that have been set for remote access in the firewall.
Keyboard language
An English and German on-screen keyboard is available on the device. Depending on the
delivery version of the device, additional languages may be available, for example, Hungarian
or Spanish. Set the keyboard language on the device so that it matches the keyboard
language on the server. If the keyboard languages on the device and the server are different,
the keys pressed on the device keyboard will not be interpreted correctly on the server.
Configuring double-click
If it is too difficult to double-click the touch screen with your finger or the touch stylus, then
make the setting in Windows Explorer on the server that files and folders should open with a
single click under "Tools > Folder options > General > Click items as follows".
You have the option to establish a greater range in which two clicks can be detected as a
double-click under [HKEY_CURRENT_USER\Control Panel\Mouse] in the Windows registry of
the server. Under "DoubleClickHeight" and "DoubleClickWidth" enter 10 pixels, for example.
To Next Page
Loading...
