Siemens SIMATIC ITC1200 V3 - Mechanical Environmental Conditions; Storage Conditions; Operating Conditions

Technical specifications
8.3 Mechanical environmental conditions
ITC V3, ITC V3 PRO
Operating Instructions, 03/2024, A5E42761061-AF
175
8.3 Mechanical environmental conditions
8.3.1 Storage conditions
The following information is for a device that is transported and stored in its original
packaging.
Type of condition
Permitted range
Free fall
≤ 0.3 m
Vibration according to IEC 60068-2-6 5 .. 8.4 Hz, deflection 3.5 mm
8.4 ... 500 Hz, acceleration 1 g
Shock according to IEC 60068-2-27
250 m/s
2
, 6 ms, 1000 shocks
8.3.2 Operating conditions
The following information applies to a device installed according to the specifications in these
operating instructions.
Built-in units
Type of condition
Permitted range
Vibration according to IEC 60068-2-6
5 ... 8.4 Hz, deflection 3.5 mm
8.4 ... 200 Hz, acceleration 1 g
Shock according to IEC 60068-2-27
150 m/s
2
, 11 ms, 3 shocks
Shock pulses within the specified range can be transferred to the display but do not impact
the functionality of the device.
PRO devices
Type of condition
Permitted range
Vibration according to IEC 60068-2-6 10 ... 58 Hz, deflection 0.0375 mm
58 ... 200 Hz, acceleration 0.5 g
Shock according to IEC 60068-2-27
150 m/s
2
, 11 ms, 3 shocks
Shock pulses within the specified range can be transferred to the display but do not impact
the functionality of the device.