Siemens SIMATIC ITC1200 V3 - The All Menu

ITC Operating mode
5.5 Assigning device parameters
ITC V3, ITC V3 PRO
Operating Instructions, 03/2024, A5E42761061-AF
85
NOTICE
Unintended reactions of the device
Two people can edit the configuration settings simultaneously: locally on the device and via
remote configuration. The most recently saved settings are the valid settings at any given
time (blue "Save" symbol).
Organize access to the configuration settings in such a way that only one person can edit
the configuration settings at one time.
5.5.3 The "All" menu
Structure
The following figure shows the "All" menu in which all the configuration settings are shown
on one page.
If you are logged on as administrator, you have write access, otherwise only read access to
the settings.