Siemens SIMATIC ITC1200 V3 - Accessories; Storage Media

Overview
1.4 System components and accessories
ITC V3, ITC V3 PRO
Operating Instructions, 03/2024, A5E42761061-AF
33
1.4.2 Accessories
An accessory kit with the necessary accessories is included with the HMI device.
Note
This section includes a selection of accessories suited to your operator control. You can find
additional versions of this selection and the full range of accessories for HMI devices in the
Industry Mall on the Internet
(
https://mall.industry.siemens.com/mall/en/WW/Catalog/Products/10144445). Details such as
the delivery quantity and technical specifications of accessories can be found in the Industry
Mall under the respective article numbers.
You can find an overview of the status and compatibility of the accessories portfolio in the
"Cross-List" on the Internet (https://support.industry.siemens.com/cs/ww/en/view/40466415).
HMI I/O components
Designation
Article number
Plug for the power supply of the HMI device, 2-pole, screw terminals
6AV6671-8XA00-....
Plug for the power supply of the HMI device, 2x2-pole, spring-type
terminals
6ES7193-4JB00-....
"...." stands for the variant key of the article number.
Protective films
Designation
Article number
Protective film 12" front, for built-in units *
6AV6881-0MJ22-....
Protective film 15" front, for built-in units and PRO devices
6AV6881-0QJ22-....
Protective film 19" front, for built-in units and PRO devices
6AV6881-0UJ22-....
Protective film 22" front, for built-in units and PRO devices
6AV6881-0VJ22-....
Protective film 24" front, for built-in units and PRO devices
6AV6881-0WJ22-....
* Protective film requires trimming for use with 12" PRO device
"...." stands for the variant key of the article number.
Storage media
Use only the following storage media for the HMI device.
Designation
Article number
SIMATIC HMI USB stick
6AV2181-0AS42-....
"...." stands for the variant key of the article number.