ITC Operating mode
5.7 Operating ITC
ITC V3, ITC V3 PRO
118 Operating Instructions, 03/2024, A5E42761061-AF
Requirement
A SIMATIC WinCC OA server that supports Industrial Thin Clients is a requirement for
operating a SIMATIC WinCC OA connection.
Operating principle
The Industrial Thin Client operates similarly to a SIMATIC WinCC OA WebClient.
The WinCC OA server provides the client components to the Industrial Thin Client.
Licensing
You do not require any licenses on the Industrial Thin Client in order to access WinCC OA. The
license is covered by the user interface license on the WinCC OA server. More on this in the
online help of WinCC OA.
See also
System requirements (Page 77)
5.7 Operating ITC
5.7.1 Notes on Sm@rtServer access
Monitoring mode
If you access a device on which only monitoring mode has been configured for Sm@rtServer
access, you can only monitor the device; you cannot intervene for control purposes.
Operating right for Sm@rtServer
When you access a device, it is possible that this device is being used at the time. In this case,
the Industrial Thin Client does not have operating rights.
If you touch the touch screen, a message is displayed stating that no operator input is
possible. How you request or force operating rights depends on the configuration on the
device you are accessing with the Industrial Thin Client.
To Next Page
Loading...
