ITC Operating mode
5.6 Configuring the server
ITC V3, ITC V3 PRO
Operating Instructions, 03/2024, A5E42761061-AF
115
Connection type "Citrix Single Application"
You specify all parameters of the Citrix connection including the application that is to be
opened when the connection is started.
In order for applications to be shown in the start bar, they have to be configured as favorites
on the server.
Depending on the server configuration, you can also access these applications or desktops via
the Web browser.
5.6.2.3 Restrictions
The following restrictions apply to the Citrix client of the HMI device:
• Automatic scaling is not supported.
• Access to USB storage media is not supported.
• Read/write access to the local file system is not supported.
To Next Page
Loading...
