ITC Operating mode
5.7 Operating ITC
ITC V3, ITC V3 PRO
Operating Instructions, 03/2024, A5E42761061-AF
125
5.7.4 Use USB memory devices
Introduction
Use the USB port on the back of the device to access connected USB storage devices.
RDP
In the case of an RDP connection you have read and write access to one or several USB
storage devices.
With active RDP connection the USB storage devices are exported to the RDP server. A folder
with the name "media on <Client hostname>" is created in Windows Explorer, in which a
separate subfolder is displayed for each USB storage device. If you change the host name in
the configuration settings of the device, the name of the folder is adapted automatically on
the RDP server.
Requirement
• The "Connect USB device as drive" option is selected in the connection settings in
"Settings > Configuration > Connections".
Procedure
1. Insert the USB memory device in the USB port on the device.
2. Choose "Settings > USB devices" in the taskbar. A media explorer opens.
3. Touch the "View details" icon in the menu bar.
4. Open the desired folder in the tree menu on the left. Its content is displayed in the window
on the right.
5. You can cut, copy, paste, and delete files via the menu bar.
6. You use the navigation buttons to navigate back, up, and to the root directory of the USB
drive.
Removing a USB memory device
To remove the USB memory device, proceed as follows:
1. Make sure the device is no longer being accessed.
2. Close the accessing application.
3. Close the media explorer via the connection list in the taskbar.
4. Wait for 5 to 10 seconds.
5. Remove the USB memory device from the USB port of the device.
See also
Connecting a USB device (Page 65)
To Next Page
Loading...
