Siemens SIMATIC ITC1200 V3 - Page 168

Technical specifications
8.1 Labels, certificates and approvals
ITC V3, ITC V3 PRO
168 Operating Instructions, 03/2024, A5E42761061-AF
If the device has Ex approval, the following also applies:
• Equipment and Protective Systems Intended for use in Potentially Explosive Atmospheres
Regulations 2016 (Explosion Protection)
UK Declarations of Conformity
The UK Declarations of Conformity are available to the relevant authorities at the following
address:
Siemens plc
Princess Road
Manchester
M20 2UR
United Kingdom
You can also find these for download on the Internet at the following address, keyword
"Declaration of Conformity":
Industrial Thin Clients Certificates
(https://support.industry.siemens.com/cs/ww/en/ps/16794/cert)
UL approval
Observe the following information:
• The device shall be supplied from an isolating source, rated 24 VDC.
• Only for use in LAN, not for connection to telecommunication circuits.
Underwriters Laboratories Inc. (E116536 or E472609) in accordance with
• UL 61010-1 and UL 61010-2-201
• CAN/CSA C22.2 No. 61010-1 and 61010-2-201
or
Underwriters Laboratories Inc. (E222109 or E472610) in accordance with
• UL 61010-1 and UL 61010-2-201
• CAN/CSA C22.2 No. 61010-1 and 61010-2-201
• UL 121201 (Hazardous Location)
• CAN/CSA C22.2 No. 213 (Hazardous Location)
Devices with article numbers -...1
Devices with article numbers -...0
Approved for use in
•
Class I, II, III, Division 2, Group A, B, C,
D, F, G; T4
•
Class I, Zone 2, Group IIC T4
•
Zone 22, Group IIIA, IIIB T135°C
•
non-hazardous locations
Approved for use in
•
Class I, Division 2, Group A, B, C, D; T4
•
Class I, Zone 2, Group IIC; T4
•
non-hazardous locations