Siemens Simodrive 611 - Page 142

5
05.01
5.8 Control module “SIMODRIVE 611 universal E”
5-142
 Siemens AG 2001 All rights reserved
SIMODRIVE 611 Planning Guide (PJU) – 05.01 Edition
Table 5-21 Encoder interface for TTL encoders (X472)
Pin Function Type Technical data
No. Desig.
1)
X472 Connector type: D–Sub socket, 15–pin
1 P_Encoder V S Recommendation for TTL encoders:
2 M_Encoder V
Order No. (MLFB): 6FX2001–2VB02
3 A I
Encoder pulse number = 1024
V = Spare retainer for connection types A, C, E or G
S
4 *A I
S Cabling
5 Reserved
Possibility of
–
– Max. cable length: 15 m
6 B
connecting to a
power supply for an
I
– Recommendation for encoder cables:
Order No. (MLFB): 6FX2002–2CA11–1
VV
0
7 *B
additional measuring
system (TTL encoder,
I
Order No. (MLFB): 6FX2002–2CA11–1
VV
0
V = Space retainer for cable type (length, ...)
8 Reserved
system (TTL encoder,
encoder 3).
–
Reference:
9 P_Encoder
The data is
V
/NCZ/ Catalog, Accessories and Equipment
S
10 R
transferred to a
higher–level control
I
S
Encoder power supply
– Voltage: 5.1 V $2 %
11 M_Encoder
system via
PROFIBUS.
V
– Voltage: 5.1 V
$
2 %
– Short–circuit proof
12 *R I
– Short–circuit proof
– Max. current: 300 mA
13 –
– Max. short–circuit current: A3.5
14
Reserved
–
S Encoder limiting frequency
15 –
– TTL encoder: 1 MHz
1) I: Input; V: supply
Encoder interface
for TTL encoders
(X472)
5 Control Modules