A
05.01
A-366
 Siemens AG 2001 All rights reserved
SIMODRIVE 611 Planning Guide (PJU) – 05.01 Edition
Attachment A
to
the EC Declaration of Conformance No. 002 V 18/10/95 (excerpt)
A8: Typical system configuration
SINUMERIK FM NC/SIMODRIVE 611A
S All of the components, which are permitted in accordance with the ordering
documentation for the SINUMERIK FM NC and SIMODRIVE 611A drive
group fulfill, as a group, Directive 89/336/EWG
S Conformance with the Standards, refer to Attachment C
Note
Only the basic measures requried for compliance with the Directive 89/336/EC
of a typical system configuration are shown in the sketch of the system configu-
ration. The installation information/instructions for EMC correct system design
in the product documentation and the Siemens EMC Directive (Order No.:
6ZB5410–0HX01–0AA0) should be additionally observed, especially when
deviating from system configuration.
A EC Declaration of Conformance
To Next Page
Loading...
