A
05.01
A-367
 Siemens AG 2001 All rights reserved
SIMODRIVE 611 Planning Guide (PJU) – 05.01 Edition
Attachment A
to EC Declaration of conformance No. 002 V 18/10/95 (excerpt)
A9: Typical system configuration
SINUMERIK 840D / SIMODRIVE 611D
S All of the components which are permitted, in accordance with the ordering
documentation for the SINUMERIK 840D and SIMODRIVE 611D drive
group fulfill, as a group, Directive 89/336/EWG
S Conformance with the Standards, refer to Attachment C
Note
Only the basic measures required for compliance with the Directive 89/336/EC
of a typical system configuration are shown in the sketch of the system
configuration. The installation information/instructions for EMC correct
system design in the product documentation and the Siemens EMC Directive
(Order No.: 6ZB5410–0HX01–0AA0) should be additionally observed.
A EC Declaration of Conformance
To Next Page
Loading...
