Siemens SINAMICS SIMOTICS S200 PROFINET - Mounting Position

5.2.5 Mounting position
Description
The 1FL2 mo
tor supports 󹪞ange mounting only. It can be installed in three orientations as
shown in the following table.
Table 5-5 Type of construction according to IEC60034‑7
Designation Representation Description
IMB5
Standard
IMV1
The motor can be used in types of construction IM V1 and
IMV3 without res
triction.

IMV3
Note
IM V3 type of construction
When con󹪝guring
the IM V3 type of construction, pay attention to the permissible axial forces
and especially to the necessary degree of protection.
Mounting
5.2Motor
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
110 Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB