6.5.2.2 Interface description - power connector (motor side)
Overview
The 1FL2 motor power interface on the motor side has di󹪜erent variants:
• SH20, 30, and 40: hybrid connector that integrates power, encoder, and holding brake
interfaces
• SH48 and 52: M17 angular connector that integrates power and holding brake interfaces
• SH45, 65, and 90: M23 angular connector
Connecting
6.5î™ Connecting the motor
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
136 Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB