Siemens SINAMICS SIMOTICS S200 PROFINET - Calling Diagnostic Functions

8.9.3 Calling diagnostic functions
Overvie
w
In the diagnostics view, you can see important information about the drive or make important
basic settings.
Figure8-15 Overview: diagnostic functions
Requirement
•
For activ
ated user management (UMAC):
The function rights required to read the drive data are activated for your user account.
Details on this topic are provided in Chapter "Security settings in Startdrive" of Industrial
Cybersecurity Con󹪝guration Manual (
https://support.industry.siemens.com/cs/ww/en/view/
109810578).
Commissioning (Startdrive)
8.9Using online diagnostic functions
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
296 Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB