Siemens SINAMICS SIMOTICS S200 PROFINET - Requirements for Commissioning

8.2 Requirements for commissioning
Requir
ements
• TIAPortal version V19 or higher is installed on your operating unit.
• Startdrive version V19 or higher is installed on your operating unit.
You will 󹪝nd the download page at the following link (
https://
support.industry.siemens.com/cs/ww/en/ps/13438/dl).
• Firm
ware versionV6.3 or higher is installed in the converter.
• You have all of the required licenses to use the TIA Portal without any restrictions.
Commissioning (Startdrive)
8.2Requirements for commissioning
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
220 Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB