Siemens SINAMICS SIMOTICS S200 PROFINET - Functions; Overview of the Functions

Functions
10
10.1 Overview of the functions
Ov
ervie
w
The converter receives its commands from the higher-level controller via the PROFINET 󹪝eldbus
interface. It uses di󹪜erent telegrams to realize di󹪜erent control functions.
Description of function
Supported telegrams
• Telegram 1
• Telegram 2
• Telegram 3
• Telegram 5
• Telegram 7
• Telegram 9
• Telegram 102
• Telegram 105
• Telegram 111
• Telegram 112
• Supplementary telegram
Control functions
• Stopping method at servo-o󹪜
• Vertical axis
• Speed limit
• Torque limit
• PTO function (for S200PN only)
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB 319