Siemens SINAMICS SIMOTICS S200 PROFINET - Checking Using the Trace Function

8.10 Checking using the trace function
Overvie
w
In a trace con󹪝guration, depending on the SINAMICSS drive being used, de󹪝ne the following:
• Signals to be recorded
• Recording duration
• Trigger conditions
Requirement
• For activated user management (UMAC):
The function rights required for trace con󹪝guration are activated for your user account.
Details on this topic are provided in Chapter "Security settings in Startdrive" of Industrial
Cybersecurity Con󹪝guration Manual (
https://support.industry.siemens.com/cs/ww/en/view/
109810578).
Commissioning (Startdrive)
8.10Checking using the trace function
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB 311