Siemens SINAMICS SIMOTICS S200 PROFINET - Status Word and Control Word

The following content is displayed:
• Connection st
atus
• Process data of the set telegram in the send and receive directions.
The values are shown in the hexadecimal format. The display of individual values is switched
between the binary and hex format by clicking on the button to the right of the value.
7.4.4.6 Status word and control word
Overview
The function view "Control/status word" provides information about the current status of the
sequence control system.
Commissioning (web server)
7.4Functions and menus
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB 195